Terms & ConditionsUpdated: March 14, 2018

Integraf LLC also operating as Integraf Holography Supplies LLC (collectively, "Integraf") provides you, the customer ("customer"), with a variety products, resources, and services to make holograms, teach holography, learn about holography, and provide custom holographic labels and services (collectively, "products").

The purchase and use of products and services from Integraf is governed by the terms and conditions set forth below. Please read them carefully. Your purchase, use, acceptance, or possession of such products indicates your acceptance of these terms and conditions. Integraf reserves the right to make modifications, alterations or updates to this site and these Terms & Conditions at any time and without notice to users. You accept the affirmative obligation to periodically review whether or not these Terms & Conditions have changed, and your continued use of these products shall be deemed an acceptance and agreement to be bound by such modifications, alterations or updates. Integraf reserves the right to refuse or discontinue service to anyone for any reason at any time.

By purchasing products from Integraf, you certify that you are at least 18 years of age and acknowledge that the products you are purchasing or accepting may include chemicals, lasers, or other materials that are considered hazardous and require reasonable care, caution, and adult supervision. If you are purchasing or ordering products on behalf of an organization or third-party, you represent and warrant that you have the legal right and authority to make this transaction for said organization or third-party and, if appicable, grant rights described herein.

Ordering & Payment

By placing an order with Integraf, you agree to pay in full for the products, services, shipping costs, and fees according to the payment terms set forth by Integraf. Integraf accepts payment by credit card, US Postal Money Order, Western Union, bank wire transfer, company check, or other means as specified in writing by Integraf. For purchases made via credit card, payment is due immediately upon shipping. In the event of failure to make payment to Integraf when due, regardless of fault, payment shall become immediately due and payable without notice or demand. For payment by bank wire transfer, you are responsible for all bank fees from your local bank and all intermediary banks.

Your payment in full to Integraf shall not be contingent on your receipt of payment from a third-party. For avoidance of doubt, you expressly agree that payment shall not be delayed or excused based on availability from a third party, including but not limited to your clients or your end-users, if any. If payment is not made when due and determined delinquent by Integraf, you agree to pay Integraf's reasonable costs of collection, including reasonable attorneys fees.

Shipping & Timing

Products are shipped CIP or EXW from San Francisco, CA, or Kirkland, WA, unless otherwise explicitly specified in writing by Integraf.

Integraf is not responsible for delays, loss, or damage of products once the products are shipped. We value our customers and their well-being, and will work with the shipping company to recover your shipment or its value in such rare event. Integraf's shipping responsibility ceases with safe delivery in good condition to the transportation company or authorized respresentative of such shipping company. By purchasing products or services from Integraf, you agree to hold Integraf harmless for any error, delay, or loss resulting from the shipping company, customs officials, or other third-parties during transit.

If actual shipping costs from the courier should increase between the time of Integraf provides a shipping quote and the time in which the ordered products ship, Integraf will cover the increase in shipping costs up to an amount equal to 10% of the original shipping quote, and customer shall be responsible for providing additional funds to cover the remaining amount of the increase.

International Orders—Customs, Duty, Taxes & Fees

When ordering from Integraf, you are responsible for assuring the product can be lawfully imported to your destination and for payment of import taxes, duties, and fees, if levied.

The recipient is the importer of record and must comply with all laws and regulations of the destination country. Orders shipped outside of the United States may be subject to import taxes, customs duties and fees levied by the destination country. The recipient of an international shipment may be subject to such import taxes, customs duties and fees, which are levied once a shipment reaches the recipient’s country. Additional charges for customs clearance must be fulfilled by the recipient; Integraf has no control over these charges, nor can Integraf predict what they may be.

Customs policies vary widely; you should contact your local customs office for more information. When customs clearance procedures are required, it can cause delays beyond our original delivery estimates.

Non-payment of import taxes, duties or fees, if levied, may prevent delivery of such package, in which case the product will be abandoned and not eligible for a refund. If the product is returned, you are responsible for the cost of return shipping and 15% restocking fee. Only the remaining balance, if any after deducting all original and return shipping charges and fees, may be considered for a refund. Refunds are governed by terms stated below.

Returns, Exchanges & Refunds

Returns, exchanges and refunds will be governed by our Returns & Refunds policy, incorporated herein by reference.

Custom Hologram Sticker & Label Services

Orders and Project Start. For custom holographic labels and services, unless otherwise specified by Integraf, orders are deemed placed and final upon receipt of initial payment or approved purchase order, which shall mark the commencement date and agreement to begin the design and production process.

Payment Terms. Unless otherwise specified in writing by Integraf, payment in full is due before the start of the project order. Any down payment, if specified in writing by Integraf, is due before the start of the project and is non-refundable.

Design, Prototyping, Customer Approvals. For projects requiring a new custom hologram design, final instructions for design of the custom holographic labels is communicated to Integraf via customer's approval of a digital proof (also known as a printing proof) or other specification. Customer acknowledges that the digital proof or specification conveys the concept but not the exact look and feel of the finished hologram due the fact that holographic effects cannot be appropriately communicated through standard 2D graphics or ink. Our responsibility to you is to produce the finished product within acceptable tolerances to the approved specification. Integraf is not responsible for errors in the digital proof approved by the customer. However, if you make a mistake in ordering, we will work with you to reproduce the order at a reduced price whenever possible. Furthermore, Integraf retains the right to modify the digital proof during production.

Integraf may offer on a project-by-project basis an opportunity to review the holographic shim prior to full production. Due to timing and costs, the extension of such offer is determined prior to the start of the project, and is provided as a customer service, not an obligation. The shim provides you a metal prototype of the hologram as it will resemble on the final product. Minor changes can be made as needed. Requests for major changes, including but not limited to layout or design elements outside the scope of the original approved design specification, will incur additional cost, and will be added to your invoice prior to production. Integraf retains the sole right to determine what constitutes a minor or major change.

All orders for custom holographic labels and services are final, non-returnable, non-refundable. We thus recommend customers request a custom prototype or our free samples to test the product for suitability prior to ordering and full production.

Workmanship, Claims, and Final Acceptance. Integraf shall provide the holographic label services and meets its obligations in a timely and workmanlike manner that meet generally acceptable standards in the holographic label services industry.

For reordered labels or short-run samples previously delivered and approved by customer, the final holographic labels delivered to the customer shall be deemed acceptable, approved, and conforming to the customer specifications if (a) the final delivered labels, allowing for reasonable tolerances, match the quality and likeness of such original label that was reordered or the approved short-run sample, and (b) a claim for questionable or defective custom holographic labels has not been made to Integraf in writing within 1 week weeks of delivery of such labels.

Claims for questionable or defective custom holographic labels must be made within 1 week of delivery. Centering of holographic images, serial numbering, overprint, and any other asset onto die-cut labels may have a variance or tolerance of 1-2mm, which may appear more pronounced on smaller sized labels, shall not be considered a defect. Imperial measurements, i.e. inches, may be rounded up or down to nearest whole or tenth metric equivalent (millimeter) and shall not be considered a defect. Unless otherwise specified, serial numbering shall allow skips and broken numbered series.

Claims made against labels received shall not delay payment of their related outstanding invoices, unless such delay in payment is expressly approved in writing by Integraf. Integraf reserves the right to request all or a portion of the labels be returned to Integraf for inspection and validation of the claims as a condition for approving any delay or change in payment terms.

Integraf's maximum liability for defective custom holographic labels or order errors is to provide replacement of material or a refund, if any, the extent of which is determined at Integraf's sole discretion on a case by case basis. Integraf reserves the right to require the customer return defective labels prior to granting replacements or refunds. In no event shall Integraf be liable for any consequential, incidental, indirect, special or punitive damages.

Lead Times. Leads times and delivery dates communicated in any way by Integraf indicate intention and best estimate, and are not a guarantee for delivery within such period. Estimates and lead times do not account for client turnaround time on approvals on design, origination (including shim review), production and other processes involved in the creation and delivery of the product. In no event shall Integraf be liable for any consequential, incidental, indirect, special or punitive damages arising from any delay in delivery time. Notwithstanding, Integraf has earned a reputation for timely delivery and making extreme efforts to help expedite processes when possible to accomodate reasonable customer requests. Upon customer request, Integraf may ship via overnight or other expedited means at cost to reduce transit time.

Intellectual Property. For custom holographic labels and services, copyright or trademarks already owned, licensed or provided by the customer, such as logos and text, if incorporated into the hologram, shall remain with the customer or original rightful owner. By providing copyrighted or trademarked materials to Integraf, you the customer (or agent thereof) certify that you are the owner of or are licensed to use such copyrighted or trademarked material, and hereby grant to Integraf, its agents, its partners, and its contractors a nonexclusive license to use, reproduce, modify, display and publish the client content solely in connection with Integraf's performance of the services and limited promotional uses. Copyright of the finished hologram and contributing components in the holograms stages of creation, including but not limited to final artwork, models, tools, submasters, and master shall remain the property of Integraf and its contractors, artists, designers, partners, and model-makers, with exclusive rights given to Integraf and commissioning customer to use such hologram, unless otherwise stated.

Conflict of Terms. The terms relating to custom holographic labels and services are in additional to, and not in lieu of, all other terms stated elsewhere in this entire Terms & Conditions document and webpage. In the event of a conflict between the terms of this Custom Hologram Sticker & Label Services section and the terms stated in other sections of this Terms & Conditions document and webpage, the terms of this Custom Hologram Sticker & Label Services section shall govern only if the transaction pertains to holographic stickers and labels, otherwise the terms stated in other sections of this Terms & Conditions document and webpage shall govern.

Product Use and Risk

You agree to assume all risks of using, handling, storing, possession, and disposal of any products received, including but not limited to the chemical products and laser products described herein. You agree to read any and all warnings and instructions accompanying these products prior to their use. If you for any reason do not want to or cannot assume all risks, please do not place an order, or please contact Integraf to return such products from Integraf already in your possession, if any, for a refund.

Chemical Products

Some products contain chemicals, including but not limited to JD‑2, JD-3, JD‑4, and PhotoFlo or their substitutes (“dark room items”). Like many common household cleaners, dark room items may contain chemicals considered hazardous by the EPA, and should be treated with respect. Copies of the material safety data sheets (MSDS) for all dark room items may be viewed and downloaded from this company website and are also available upon request by contacting Integraf or the manufacturer. You agree to provide competent adult supervision when using, handling, storing, possessing, and disposing these Chemical Products.

Laser Products

The holography lasers and diode laser modules (“lasers”) provided by Integraf are classified as Class IIIa and Class IIIb. Laser light is recognized as a potential eye hazard. Avoid looking directly into any laser. By purchasing, accepting, or using our lasers, you are knowledgeable of all safety precautions, standards, and procedures for handling and using said lasers as set forth by the American National Standards Institute (ANSI).

Indemnification and Limited Liability

You agree to assume all risk for use, handling, storage, possession, disposal and service of products.

You agree to exempt and release Integraf and any of its directors, officers, employees, agents, advisors, and contractors from any and all liability, claims, expenses (including legal fees, medical expenses, or otherwise), demands or actions or causes of action whatsoever arising out of any damage, loss, injury, pain, suffering, or death as a result of the use of any product or service provided from Integraf. This release encompasses all losses, damages, expenses, injuries and pain, physical or emotional, and deaths resulting from any cause, whether the fault of the user, a defect in the product, misuse regardless of intention, or delay in providing service.

This product and service liability limitation cannot be amended, altered or made void by any representative either verbally or in writing of Integraf, supplier, or the manufacturer, and the consumer agrees to the terms of these limitations when ordering, purchasing or receiving merchandise or service from Integraf. If you do not agree to these terms, please do not place an order, or please contact Integraf to return such products for a refund.

Integraf shall not be liable for any indirect, special, consequential, or punitive damages (including lost profits) arising out of or relating to this agreement or the transactions it contemplates. In no event shall Integraf’s liability exceed the price the you paid to Integraf for the specific goods or services provided by Integraf giving rise to the claim or cause of action.

Force Majeure

Integraf shall not be liable for the failure or delay in the performance of any of its obligations when such failure or delay is due to fire, flood, strike, riots, wars, embargoes, governmental laws, orders or regulations, storms or other similar different contingencies beyond the reasonable control of Integraf.

Trademarks, Copyrights & Patents

The following terms and names are trademarks of Integraf LLC: Integraf, Holokit, Holokits, JD, JD-2, JD-3, JD-4, GP-2, TJ1 (series of developer kits and formulations).

Material and content provided on this website and product instructions are copyrighted, all rights reserved. Product instructions protected by copyright law include but are not limited to those instructions accompanying the Holokit hologram kit product line and the JD holographic developer product lines.

Applicable Law

All disputes arising out of the performance of, or relating to these Terms and Conditions, shall be settled amicably through negotiation. In case no settlement can be reached through negotiation, any litigation related hereto shall be resolved in the courts of San Mateo County, State of California, and you consent to the exercise of personal jurisdiction over you by such courts. The United Nations Conventions on Contracts for the International Sale of Goods shall not apply to this Agreement. These Terms and Conditions are governed by the laws of the State of California, without giving effect to any principles or conflicts of law.